Check for duplicate packets

Vedi anche

  • DuplicatePackets - Wireshark 1

Run as user

Instruction number



If you have strange network behaviour it might be caused by duplicate packets.

In my case the most noticeable effect of duplicate packets is that interactive SSH sessions stutter: for example, when I keep the space button pressed, every now and then the terminal freezes for a moment.

You can check for duplicate packet with Wireshark using this filter

tcp.analysis.duplicate_ack or tcp.analysis.retransmission

If you get lots of duplicate packets try restarting all your network devices (router, switches, clients, etc…).

Try also updating or changing the Linux kernel (this fixed it in my case).

Drop AVM Fritzbox HomePlug packets

If you run Wireshark in a network with certain AVM Fritzbox devices you will see lots of broadcast packets every seconds, such as this

15 1.780941119 AVMAudio_00:00:00 AtherosC_00:00:00 HomePlug AV 60 Qualcomm Atheros, OP_ATTR.REQ (Get Device Attributes Request)


Vedi anche

  • firewall - How can I use iptables to drop packages for an invalid ether-type? - Server Fault 2

  • Dropped HomePlug AV packets 3

Run as user

Instruction number



If you run this command on an interface you will see all the dropped packets

cat /sys/class/net/${interface}/statistics/rx_dropped

This is all unnecessary traffic which apparently you cannot disable from the router. What you can do is let the computers ignore all this traffic.

  1. install the netfilter package. Debian:

    apt-get install netfilter
  2. add this rule with the terminal or with scripts

    nft table netdev filter '{ chain ingress { type filter hook ingress device eno1 priority 0; policy accept;  meta protocol {0x8912, 0x88e1} drop; }; }'"


Vedi anche

  • OpenWRT/Lede AP: Drop FritzBox Homeplug Broadcasts · GitHub 4

Run as user

Instruction number



  1. install the ebtables package. Go to System -> Software

  2. click on Update lists...

  3. filter ebtables

  4. click on Install...

  5. go to Network -> Firewall -> Custom Rules

  6. append these commands

    ebtables -A FORWARD -p 88e1 -j DROP
    ebtables -A FORWARD -p 8912 -j DROP
  7. go to System -> Reboot

  8. click on Perform reboot


For some reason I can still see the packets when a computer is connected to an OpenWRT device using these rules which in turn is connected to the Fritzbox!


1 GNU General Public License, Copyright (c) Wireshark Wiki contributors

2 CC-BY-SA 4.0, Copyright (c) 2021 Ingo (at

3 unknown license

4 unknown license